Welcome to Forever Lost.

For those of you that know me, welcome back. We’ve been through many revisions throughout the years, going from personal blog with many an article to photo blog to longer periods of silence. Today, I’m happy to say that Forever Lost is back, in time for the new year, 2015.

For those of you that don’t yet know me; Hi. My name is Dave, and I’m a dutch guy living in South Korea. I’m married to my wonderful wife Younhee and, together with her, love doing DIY and home improvement projects. I personally also love to follow other people with their projects, so wanted to get back to blogging by writing about our projects, too. Share the wealth, so to speak.

This blog will not just be about DIY projects, though it will be a main and oft-recurring topic. For those of you who are curious about what life is like in South Korea, you’ll likely want to follow along as-well, as I’ll be writing about things life, too. From personal challenges with small (cultural) differences to small things I notice that I just love.

Follow along, and I’ll be sharing with you written stories based on my experience here in Korea, photos of every day moments in life, videos and video compilations of our projects and everything else, and more.  You may have already seen my photos come by on Flickr, or my videos on YouTube, but this site here will be a nice and convenient place to see photos and videos, context included.

Thank you so much for reading, and I hope you’ll enjoy what’s coming next.

Welcome to Forever Lost.

– Dave Jansen

Photo: B1


Last week I was waiting outside the store while Younhee was picking up some milk when I noticed a dark stairway inside the building. Figuring I’d give it a try, I walked in and position the camera. Mind you, I had ISO160 loaded up in my Pentax 645 so I wasn’t expecting much. It was very dark in there, and following the built-in light meter I was told to hold the camera still for about 2 seconds (if memory serves). I must admit, the result is not bad at all.. Seems like the space was quite bright in it even :).

Pentax 645 with 45mm f/2.8 on Expired (2006 I think) Fujicolor Pro 160 film.

Kitchen: Replacing the “Korean Restaurant” light.


As part of our “home enlightenment” plan, we wanted to change the light in the kitchen area. Our kitchen area is a bit of a unique one, as it used to be this house’s living room but was changed by the owner at some point in the past (for some reason I can’t fully comprehend). They built the kitchen right in front of where the living room windows facing out to the balcony used to be, and that was that. You gain a (bed-)room, but lose the living room. Hum.

Anywho. Light! This room was lit up by a cross-shaped light that holds four phosphorescent lights (those relatively small ones that plug in only on one side, you know the kind) that looked god-awful. It did its job of brightening up the place alright, of course, perhaps too much so. So that thing had to go.

Unfortunately, in most local light shops here in Seoul you can only choose from two kinds of lights;

  1. Cheap, super bright phosphorescent lights like the one we want to get rid of (20-40.000 Won)
  2. Super expensive, overly kitsch lights made of millions of tiny fake diamond stones and faux golden stuff and things (300-500.000 Won. I’m not even joking)

Needless to say, neither were particularly attractive options. Lucky for us though, a while ago we visited what I dubbed as “Fake Ikea” — somewhere in Incheon is a store that bulk imports real Ikea furniture from China and sells it here at a (sometimes slight, other times more than slight) markup. Great for us who like good furniture at decent prices and enjoy DIYing (that is, until the first real Ikea opens up this very month!). This particular store also had a few other smaller shops inside its building, one of which sells great looking lamps at very affordable prices. So this is where we got a few of our lights, including the one for the kitchen area. Score!


When removing light fixtures that have been on a wall or ceiling for a longer while, you’re going to run into some typical issues. Discoloration of the wallpaper is one, broken/damaged/undone wallpaper another. We had both, of course. So to fix this without having to redo the entire wallpaper on the ceiling (our house —like so many here— has wallpaper on the ceiling too), Younhee got the idea to use stickers easily found at Daiso (and similar shops) that basically is designed for this very purpose (or to pretty up your kitchen doors, for example). We picked up a few rolls of this stuff and she got to cutting. Because I can’t cut very well. Delegation.



After cutting it to size, Younhee carefully attached it to the ceiling while I stood by snapping photos, letting her do all the work. After this it was an easy task of attaching the wires using those little push-hold-thingies that were already on there (and I bought a few extra at a local store), and attaching the lamp fixture to the metal bracket I previously screwed in place.



Normally you’d want to use special plugs for this sort of stuff, but it seems like these are not at all common here in Korea. When we tried to get them at a local “screws and cables and such” store, all we got was weird, confused looks while they kept trying to give us wall plugs instead. Oh well.



Looks pretty good, right?

Other chapters in this series
  1. Kitchen: Adding some light below the closets.
  2. Kitchen: Replacing the "Korean Restaurant" light.

Kitchen: Adding some light below the closets.


Most Korean houses tend to have rather awful looking lighting. You know the phosphorescence lights that make the place real bright but don’t really make it look good in doing so. Our home is no exception here.

The kitchen is particularly bad. There is a fixture in place in front of the kitchen closets that holds one out of two possible lights, as putting the second one in place would make it impossible to fully open one of the closet doors. Yikes.

To fix this, I wanted to install some lights under the closets, brightening up the kitchen itself without making the entire area an attention-grabbing beacon. We found some decent enough looking LED strips at Homeplus, so brought two back with us for this project. They had two different kinds; one looks rather unfinished and had a simple on/off switch. The other looks finished (frame and all) and has a “touch” button that, as we later found out, has three separate brightness modes.


We chose the finished looking ones but, to be honest, in retrospect I would’ve gone with the unfinished looking ones, as I prefer to have a simple on/off switch and the lights themselves mostly disappear behind the closet doors anyway. Oh well.


I used a simple cable strip from Daiso to both keep the cable from sagging and hide it (mostly, anyway). I didn’t finish it completely just yet, as you can see in the photos, but it’s fine for what it is now. You don’t really see anything unless you actively look up under the closets anyway.


I drilled a small hole on at the end for the power cables to go through. I made the hole big enough so that the small power plugs fit through so I didn’t have to cut and re-attach them. On the other side I plugged in both power adapters into a wall socket I placed there just for this purpose, which sits behind our microwave.


All in all it was very little effort to get these in place, and the result is definitely a massive improvement over the previous lighting in place. This light is actually still there right now, pending us figuring out what exactly we want to do with it. I’m ok removing it altogether, but we may want to do something else there at some point.

Other chapters in this series
  1. Kitchen: Adding some light below the closets.
  2. Kitchen: Replacing the "Korean Restaurant" light.

Project Bathroom: Fixing the window sliders.


After all paint work was finished, I wanted to try to see if I could fix up the metal strips used to guide the windows on. These are simple aluminum (I believe) strips that the wooden windows commonly found in (slightly older) Korean houses “ride” on with small wheels. These bars are rather badly rusted, especially because our bathroom is, for one reason or another, very prone to making things rust quickly.


I took the bars outside to our balcony and simply put a sander on it, to see if that would make any difference. I had no idea if this would help at all, but hey, why not. Fortunately this made an incredible difference. It took quite a bit of effort (and I went through two pieces of sanding paper — it isn’t really meant for this purpose after all), but the result was quite impressive. Sure the bars got quite scratched up but the scratching was very fine so it actually looked quite nice. The color difference was the most obvious though, going from an old bronze-like color to a silver shine. Great!


After this I installed them back in the window frame, using new small nails instead of the original ones (as they too were badly rusted and in some cases broken even) and voila. Looks quite nice.

Project Bathroom: Paint Shop Pro.


And, at last, we’ve come to the good stuff; painting. Not that everything before this wasn’t important, but at least with this step you get visually pleasing results. Ideally, anyway ;-).


We have decided upon two separate colors for the bathroom; a very light blue (almost white, especially in photos) for the walls, and a darker blue for the ceiling, windows and door frame. We were on the fence on whether or not to paint the inside of the door, but have decided to leave it as-is for now. The project was already starting to take up a lot of time and kept us from being able to use the bathroom at home. Not the greatest experience, I have to admit.




We put on three coats of paint in total. The first two coats on the same day, as the paint dried relatively quickly, and the third coat the next night. The dark blue covered much better so we didn’t have to be as thorough with that one as with the light-blue color on the walls. Even after two coats we could see some shadows coming through of what was behind it before, but the third coat fortunately got rid of that all.


We also painted the windows right away. These only needed two coats, so that was great.


That’s it! I’m telling you, even after the first coat the bathroom already looked completely different (heck, just the primer did that). When I started with the ceiling the entire room just completely changed, and I mean that in the most positive of ways.

Video: A Moment In Paint.

Spend the next minute of your day watching Younhee paint, set to Yann Tiersen’s Prière Nº3. You’re very welcome.

Project Bathroom: Primer time.


Now we’re getting to the real stuff! It’s time to put on a layer or two of primer, in preparation of the real real stuff. Sigh. Ok, well, let’s get on with it!



Painting is relatively straight-forward, so this was quite easy. Just time consuming, of course. Since this is the ground layer you don’t have to be all that careful, especially with the right pieces taped off and all, so this was really just a question of getting it all on the wall.



After letting the first layer dry overnight, we applied the second layer the second evening, and let this too dry overnight. The result was already quite good looking. While you could still see some of the original tile colors shine through, from a small distance the bathroom already looked incredibly different, being all white.


We also applied primer to the windows, as these will be painted as-well. Younhee also took this moment to apply primer to a small plastic cabinet we have, in preparation for it to be painted firetruck-red-ish.